Electronic Reviews: 04/18/10

Sunday, April 18, 2010

BREADBOARD, 840 CONTACTS

Design and change circuits quickly and cleanly.
Breadboards accommodate all sizes of dips and discrete components with lead diameters up to 0.032".
Interconnect with solid hook-up wire (#22 AWG recommended).
Wires and components can be used and re-used many times without damage to board or components.
Dual row of buss terminals on each side of terminal strip.
Double-sided adhesive tape backing.
Holes for screw mounting. 2.2" x 6.5" x 0.38" high.

Pre-cut and prepared jumper wires for breadboards available: For pre-cut 22AWG solid wires see CAT#s JW-140, JW-350. For flexible jumpers with soli tips see CAT#s JWM-50, JWM-70, JWM-100, JWM-150 or JWM-200.

Others

source by : http://www.allelectronics.com/make-a-store/item/PB-840/BREADBOARD-840-CONTACTS

SOLDERLESS BREADBOARD, 400 CONTACTS

SOLDERLESS BREADBOARD, 400 CONTACTS

Design and change circuits quickly and cleanly.
Breadboards accommodate all sizes of dips and discrete components with lead diameters up to 0.032".
Interconnect with solid hook-up wire (#22 AWG recommended).
Wires and components can be used and re-used many times without damage to board or components.
400 tie points.
300 contacts on main board and 50 contacts on each of two power distribution strips. Distribution strips are removable.

Pre-cut and prepared jumper wires for breadboards available: For pre-cut 22AWG solid wires see CAT#s JW-140, JW-350. For flexible jumpers with soli tips see CAT#s JWM-50, JWM-70, JWM-100, JWM-150 or JWM-200.

Others

source by : http://www.allelectronics.com/make-a-store/item/PB-400/SOLDERLESS-BREADBOARD-400-CONTACTS

BREADBOARD, 1680 CONTACTS

Design and change circuits quickly and cleanly.
Breadboards accommodate all sizes of dips and discrete components with lead diameters up to 0.032".
Interconnect with solid hook-up wire (#22 AWG recommended).
Wires and components can be used and re-used many times without damage to board or components.
1680 tie points. 2 terminal strips, 4 buss strips, 3 binding posts mounted on an aluminum back plate 5 1/8" X 6 7/8" X 3/8" high.

Pre-cut and prepared jumper wires for breadboards available: For pre-cut 22AWG solid wires see CAT#s JW-140, JW-350. For flexible jumpers with soli tips see CAT#s JWM-50, JWM-70, JWM-100, JWM-150 or JWM-200.

Others

source by : http://www.allelectronics.com/make-a-store/item/PB-1680/BREADBOARD-1680-CONTACTS

CHARGER FOR NMH-3AA

Designed to charge a Mobicel cordless phone with its 3.6V 1200 mAh battery pack or the battery pack alone. Requires a 12Vdc 400mA wall transformer (2.1mm coax plug, center +) for power.

The wall transformer to power this charger is CAT# DCTX-1240 $4.00 each
The battery pack that fits this charger is CAT# NMH-3AA $2.50 each
The phone that fits this charger is our CAT# PHN-41 $1.00 each

Others

source by : http://www.allelectronics.com/make-a-store/item/BC-1200/CHARGER-FOR-NMH-3AA

12V 1A CHARGER FOR LEAD-ACID BATTERIES

Input: AC 100-240 V 50/60 Hz.
Output: 12Vdc, 1 Amp
Max. Charging Voltage: 14.8Vdc.
Float charge Voltage: 13.8Vdc.
Table-top charger designed to charge 12V sealed lead-acid batteries.
Should be good for up to 7Ah batteries.
Output cord has a custom connector which will need to be removed to add your own connector or alligator clips.
Because of improper storage many of these units have exterior blemishes, but the units function fine.

Others

source by : http://www.allelectronics.com/make-a-store/item/BC-100/12V-1A-CHARGER-FOR-LEAD-ACID-BATTERIES

BATTERY CHARGER FOR 4 AA CELLS

Drop-in rapid-charger for a Nickel Metal-hydride battery pack.
Can easily be adapted to charge 4 individual AA or AAA cells by replacing the battery dock, designed for a DR-12 pack,
with a suitable battery holder, ie.
CAT # BH-341, BH-342, BH-44.
Typical charge time, four to six hours.
Output: 5.5 Vdc, 1.7 W.

Others

source by : http://www.allelectronics.com/make-a-store/item/BC-25/BATTERY-CHARGER-FOR-4-AA-CELLS

PHILIPS INDOOR/OUTDOOR AMPLIFIED FLAT PANEL ANTENNA

PHILIPS INDOOR/OUTDOOR
AMPLIFIED FLAT PANEL ANTENNA

Philips MANT940. Digital TV / HDTV optimized UHF panel array, improves analog and digital UHF reception, channels 14-69. Optimum gain, low-noise amplifier - critical for DTV. Weather resistant, paintable surface to match your interior or exterior decor. Install your antenna indoors or out, just about anywhere. Can also be used with a rotor and mast mount (not included).Included in-line amplifier, 20 foot co-axial cable, mounting kit and wall adapter. May require additional hardware for all types of mounting

Others

source by : http://www.allelectronics.com/make-a-store/item/ANT-940/PHILIPS-INDOOR/OUTDOOR-AMPLIFIED-FLAT-PANEL-ANTENNA

HDTV ANTENNA W/ AMPLIFIER

The KK-5000DX is a high performance indoor antenna designed to receive TV and FM signals. HDTV compatible, works with digital converter.

Features:
* State-of-the-art 2 stage VHF amplifier
* Low noise high gain UHF amplifier incorporating surfuce mount technology
* Adjustable linear gain controls
* Noise reduction circuit
* Highly sensitive VHF elements and high gain direct on all UHF elements
* Tilt adjustment
* LED power indicator

Specifications:Aplifier Gain:
VHF: Up to 24 db
UHF: Up to 28 db
FM: Up to 29 db
Impedance: 75 ohm (4ft. RG59u co-ax cable)

Others

source by : http://www.allelectronics.com/make-a-store/item/ANT-203/HDTV-ANTENNA-W/-AMPLIFIER

TV / FM ANTENNA AMPLIFIER

Emerson # EAN3000.
Antenna or CATV amplifier for TV and FM frequencies, 30 - 850 MHz.
Two-position switch for High or Low Gain (20dB or 5dB).
Plugs directly into a standard 120Vac outlet.
Coax F-connectors are provided for ANTENNA-IN and two OUTPUTs.
Includes a 6' coax cable with F-connectors.

Disclaimer: This device is advertised as an antenna eliminator / amplifier. Designed for use with CATV systems, it is supposed to give cable TV subscribers a way to receive airborne TV signals by turning your home electrical wiring into a giant antenna. We don't claim that ability for the unit. We only claim its usefulness as an antenna/ cable amplifier.

Others

source by : http://www.allelectronics.com/make-a-store/item/AMP-300/TV-/-FM-ANTENNA-AMPLIFIER

WIRELESS MOTION-SENSOR ALARM

Intermatic Model SP230B.
Effective, easy-to-install, motion-sensing alarm.
Protects against unauthorized entry.
Passive Infra-red (PIR) sensor detects motion within a specific area, usually a room, and triggers a loud, piercing 110dB alarm.
30 or 120 Degree viewing angle.
Personal 4-digit code arms and disarms the device.
30-second exit delay.
10-second entry delay.
Chirping low battery indicator.
Mounts on wall, shelf or tabletop.
Instructions included.
Operates on 4 AA batteries (not included).

Others

source by : http://www.allelectronics.com/make-a-store/item/ALM-230/WIRELESS-MOTION-SENSOR-ALARM

WIRELESS DOOR AND WINDOW ALARM

Intermatic Model SP130B. Wireless, door-mounted alarm protects against unauthorized entry. When door (or window) is opened, magnetic sensor switch triggers a loud, piercing 110dB alarm. Programmable keypad code for entry and exit.
Mounts on door.
Chirping low battery indicator.
Instructions included.
Operates on 4 AA batteries (not included).

Others

source by : http://www.allelectronics.com/make-a-store/item/ALM-130/WIRELESS-DOOR-AND-WINDOW-ALARM

2-TONE ALARM SIREN

Honeywell / Ademco WAVE2. Loud (106db) dual tone siren for home or commercial alarm installations.
Can be wired for warble or steady tone. 4.32" x 3.28" x 2" white ABS plastic snap-open hinged case.
Patented case design fits single gang electrical box or wall plate.
Terminal strip eliminates splicing and soldering.
Corner or ceiling mounting with no additional brackets or hardware.
Channeled case back for convenient wiring access.
Vertical or horizontal mounting for great versatility. 12VDC 500Ma.UL.

Others

source by : http://www.allelectronics.com/make-a-store/item/ES-16/2-TONE-ALARM-SIREN

PRO THROTTLE

• Windows 98, ME, 2000, XP/XP64,Vista (all versions), Windows 7
• Mac OSX*
• 3 axes and 24 buttons
– X and Y axes on miniature joystick
– Z axis on accurate throttle sliding motion
– 3 traditional push buttons
– 1 mode switch button
– 3 four direction HAT switches
– 1 eight direction POV HAT switch
• Total of 176 programmable functions with
Control Manager software (included)
• Three color mode indicator LEDs on base
• Ergonomic left hand HOTAS design
• Large sturdy base with 7 foot USB cable
• Plug and Play driverless USB installation
• Quality industrial components and construction
• Two year limited warranty

source by : http://www.chproducts.com/retail/t_pro_throttle.html

THROTTLE QUADRANT

• Windows 98, ME, 2000, XP/XP64,Vista (all versions), Windows 7
• Mac OSX*
• 6 axes and 12 buttons
– X, Y, Z, R, U, and V axes for engine control
– 6 bi directional flip switch buttons
• Total of 176 programmable functions with
Control Manager software (included)
• 6 physical detents (one per lever)
• 12 virtual buttons (one per detent - idle and
reverse) with use of Control Manager software
• Large sturdy mounting base with 7 foot USB cable
• Plug and Play driverless USB installation
• Quality industrial components and construction
• Two year limited warranty

source by : http://www.chproducts.com/retail/t_tq_quad.html

CH ECLIPSE YOKE

• Windows 98, ME, 2000, XP/XP64,Vista (all versions), Windows 7
• Mac OSX*
• Fully Programmable Fingertip Paddles: ideal for flight and racing sims
• 8-way POV hat and rocker switch on both left and right side of grip
• Programmable Trim/Scroll Wheel with center push function
• Three color LED selector dial
• Two backlit push buttons and third traditional push button
• Two 2-way flipper switches on base
• Two traditional push buttons on back of each grip
• 6 analog 10bit axes, traditionally used for:
– Aileron
– Elevator
– Throttle
– Propeller Pitch
– Fuel Mixture
– Rudder
• Colored handles for Throttle/Prop/Mixture
• New and Improved Industrial grade material and components
• Free Floating, non-binding shaft
• Adjustable clamps recommended for desks 3/4" to 2 1/4" inch thick
• Ergonomic Yoke handles with realistic in
and out movement
• Large sturdy mounting base with 7 foot USB cable
• Plug and Play driverless USB installation
• Two year limited warranty

source by : http://www.chproducts.com/retail/y_eclipse.html

FLIGHT SIM YOKE

• Windows 98, ME, 2000, XP/XP64,Vista (all versions), Windows 7
• Mac OSX*
• 5 axes and 20 buttons
– X and Y axes on realistic yoke grips for Aileron and Elevator control (mechanical trim wheel for physical potentiometer centering only)
– Z, R, and U axes for Throttle, Prop, and Mix control
– 4 traditional push buttons
– 2 bi directional flip switch buttons
– 2 bi directional rocker switches
– 1 eight direction POV HAT switch
• Total of 144 programmable functions with
Control Manager software (included)
• Ergonomic Yoke handles with realistic in
and out movement
• Large sturdy mounting base with 7 foot USB cable
• Plug and Play driverless USB installation
• Quality industrial components and construction
• Two year limited warranty

source by : http://www.chproducts.com/retail/y_fsyusb.html

Electronic Reviews